I havent done this recently but a few months ago I got hold of a Storm Eagle from ForgeWorld, While it is a very nice model but boy what a bitch to put together.
Evn though it wont really be seen in all its great detail I started by painting the interior, drybrushing the plates and braces and picking out the finer details like computer screens and such.
Then came time to attaching both sides to the base plate, this proved to be fiddly as I wasnt able to fully straighten the sides fully without risking breaking the pieces at the narrow door bottom...
Next the top Plate was attached and I picked out all the panel instruments, I hadnt seen the cross panel that the levers he's holding onto attach to until to late so at the moment not sure if its the best picture really... I'll let you decide...
Cockpit canopy plate got painted seperately and then attached in place. I then masking taped off the hole in the cockpit ready to paint (Spray with Army Painter Angel Green) the rest of her.
Just before spraying I decided to use some of Forgeworlds Etched Brass.
And then here's the pretty much finished article, there are still a couple of things I need to do but its about 80-90% done
No comments:
Post a Comment